How To Prepare Your Car Before Professional Painting

 When it comes to car paint repair, any automotive professional in Australia will advise the same thing – it is all about surface preparation. Whether you are re-spraying the whole vehicle or repairing a chip, preparing the paintwork is as important as applying the actual paint. It also plays a big part in the quality of your end result. We will guide you through some hints to help you prepare like a professional.

Cutting

Cutting is removing thin layers of paint using an abrasive compound. Cutting can be done as a preparation step before applying paint. There are different types of compounds used and each one has a different cutting power. If you are not sure which one to use then you should just ask your supplier for advice.

Sanding

Sanding involves removing the top layer paint on your car using abrasive materials. Your mobile car paint repair specialist should do it right to achieve the best results for your car. Depending on the paint job, sanding can be done either by an electric orbital sander or sandpaper and you will need to use different grades of sandpaper depending on the paint job.

Priming

This is an essential step in car painting when the surface to be painted is metallic. You will need to do priming before applying any colour or topcoat. Priming is important since it seals the surface and creates a protective layer, creating the ideal car surface for your colour coat paint to stick to. Consider using high build primers because they contain high solid-content which help in smoothing any imperfections on the metal.

Choose the right paint

If you want to achieve an excellent carpaint repair result then you need to choose the right paint. Whether you are painting your vehicle a different colour or matching the existing colour, you will need to choose the correct shade and quality.

 

Enable GingerCannot connect to Ginger Check your internet connection
or reload the browserDisable in this text fieldEditEdit in GingerEdit in Ginger×

Plastic Bumper Repair Procedures That You Need To Know

 

Mobile bumper repairs Sydney in New South Wales Australia is in a state of constant change. In fact, the only true constant in the bumper repair industry is change. Those people who do not want to adapt to this change and figure out how to meet the changes head-on either fall behind or constantly try to catch up with the competition.

Why plastics?

It seems that a lot of manufacturers are making bumpers from plastic. While we understand the environmental implications of plastics, plastics are cheaper and they can be re-used. If you are used to repairing bumpers made from other materials then it is important to acquire a new skill set to repair plastic bumpers. A lot of people do not like to leave their comfort zone but with the choice of developing a new skill, they will venture out of their comfort zone and know what is on the other side of mobile bumper repairs.

Identify before repairing

Do not get nervous and uptight. This is not different from working with steel, aluminium or magnesium. You should know the type of material you are working on before developing a repair plan. You also need to plan.

Repairing bumper covers

Bumper covers are not made of one plastic. They are made of several plastics and all of these plastics fall into thermoplastic and thermoset categories. It is therefore important to know the type you have to determine the procedure of repair. Thermoset plastics are a chemically catalysed process where different parts are mixed and injected into the mould.

Before mobile bumper repairs Sydney in New South Wales Australia, it is crucial to know that thermoplastics are dumped into the hopper while in pellet form and then melted by a source of heat and injected into a mould. The part can be melted by heat once it has cooled.