Tips on How To Repair A Car Paint Scratch

Are you looking for a professional car scratch repair Sydney? Chips, scratches and other imperfections are unavoidable. However, a careful repair job can be almost invisible. We have a few tips on how to repair a paint scratch on your car.

Washing the car

It is essential to wash your car thoroughly. This will remove all the dirt and debris. It is crucial to pay more attention to the area with scratches when washing. The area should be washed carefully to ensure that it is clean. After cleaning, it is recommended to dry the car using microfibers.

Sanding

The primary purpose of sanding is to strip away the top layers of paint. You can use 2000-grit sandpaper to smoothen the scratched area. Sand the area for about 10 to 15 seconds. First, you should check the area to know whether you need to sand it deeper or not before the car scratch repair NSW.

Rinsing the area

Rinsing is very important because it helps to remove the remaining debris and dirt left after sanding the affected area. You will need a clean microfiber to wipe the surface of the car.

Spray primer coats

After sanding the area, you need to spray some primer coats to fix deep scratches. The primers should be sprayed on a back and forth motion. Wait for about 7 minutes for the primer coat to dry. After the primer coat has dried, spray another layer.

Apply paint coats

For your car scratch repair Sydney to look professional, you need to paint the same colour paint to the place you applied the primer. You should wait for at least 5 minutes between each time. This is to give the paint enough time to dry. You will then need to wax the repaired area. Waxing helps to seal the paint.