Common auto painting mistakes you need to avoid

 

For mobile scratch repair Sydney CBD, there is nothing better than accomplishing a sparkling new paint job. Unfortunately, not every car paint job turns out great. Sometimes, car repair specialists will make mistakes that can result in very serious inconsistencies in the final project. External factors such as climate can also lead to unexpected problems. Here are some common auto painting mistakes you should avoid.

Cracks

Cracks can appear on paint jobs for different reasons. Improper preparation for paint can lead to cracking whilst choosing the wrong reducer can result in the lifting up of the undercoat and making cracks appear. You can fix this problem by waiting for the film to cure completely before sanding the area and reapplying the paint.

Flaking and peeling

Flaking and peeling are common problems in auto painting. It occurs when dried paint stops adhering to the substrate. This can be caused by poor surface preparation. A good mobile scratch repair specialist should know how to remove surface irregularities and recoat the area.

Runs and sags

Car paint can run or sag for various reasons. The improper gun technique is the most common cause of runs and sags. When applying car paint, it is important to use sufficient air pressure. You should also use the right air cap and fluid tip. If you position your gun properly and ensure your passes have overlapped correctly, you will prevent runs.

Orange peel

When dried paint has a rough finish, it causes orange peel. Orange peel can also be caused by using the reducer improperly. It can also be caused by excessive film thickness, poor technique and so on. You can fix an orange peel by sanding out all the imperfections and repainting the area.

Fish eyes

Fish eyes are caused by contaminated paint. It is, therefore, important to purchase a special fish eye remover to mix with your paint to eliminate contamination during mobile scratch repair Sydney CBD.